 An
economical yet powerful boat towed metal detector for ferrous
and non-ferrous metals.
With it's 12 foot wide and 8
foot deep detection envelope
his
detector will locate a variety of targets including aluminum
boats, brass propellers, outboard motors, steel anchors, bronze
cannons, and gold bars.
The claim-to-fame of this
pulse induction metal detector is it's ability to ignore
minerals in the environment while maintaining high sensitivity
to all metal targets. The Pulse 10 is not affected
by the minerals in salt water, coral, rocks with a high iron
content, or magnetic (black) sand; all of which cause erratic
readings in
conventional detectors. Also, the detection range is
unaffected by the medium between the metal detector and the
metal target. Performance does not change whether detecting
through air, water, silt, sand, or solid coral.
The Pulse 10
system includes an 18 inch search coil with 150 feet of
cable, a towfish, and the top-side control unit. The control
unit features high/low sensitivity switch (for pinpointing
targets), and both meter and audio readouts to indicate the detection of
metal objects. Options include 300 foot tow cable, UA-2 altimeter, and
RS232 data output, 0 - 5 volt analog output, and the DDW-1 deep
dive wing. The system is powered by two 12 volt
batteries with a total power consumption of only 8 watts.
The
Pulse 10 is in use by military units, law enforcement agencies,
and commercial diving companies worldwide. It's low cost and
large detection area make this detector an excellent choice for
commercial operations, as well as recreational and professional
treasure hunting.
Key Features of the Pulse
10:
Commercial grade construction, large detection area, optional
computer interface, and audio jack for
headphones.
The Pulse 10 is backed by
Fishers exclusive, unconditional TWO YEAR warranty.
Download Pulse 10 Data
Sheet |
